As a trusted HSE consultancy firm, we specialize in helping organizations ensure workplace safety, particularly when it comes to working at height and Rescue. Our comprehensive training and solutions ensure compliance with safety regulations, reduce risks, and promote safe practices for working at height and executing safe rescue operations.
Working at height involves tasks performed in locations where a person could fall and suffer injury, even at above or below ground level. These tasks include working on ladders, scaffolds, or roofs and accessing areas through fragile surfaces or open holes.
Rescue operations focus on retrieving individuals who may have fallen, become stranded, or faced emergencies while working at height. A properly designed rescue plan is vital to ensure timely and safe recovery.
Why to Manage Working at Height?
- Falls are the leading causes of death in the construction industries.
- Most fatalities occur when workers fall from open sided floors and through floor openings.
- Falls from 4 to 6 feet can cause serious injury or sometimes death.
In 2021, the construction industry accounted for nearly one in five workplace fatalities. Over one-third of these deaths were caused by falls, slips, and trips, with the majority resulting from falls to a lower level. Notably, construction contributed to 46.2% of all fatal incidents involving falls, slips, and trips.
What should employers do?
Work at height tasks should be carefully planned, properly supervised, and executed by individuals who possess the necessary skills, knowledge, and experience. It is essential to use the appropriate equipment designed specifically for working at height.
A practical and sensible approach should be taken when determining safety precautions. Simple, low-risk tasks may require minimal planning, and in some cases, common sense may indicate that no additional precautions are needed.
What does the Law State about Working at Height?
Section 32(c) of The Factories Act, 1948, mandates that in every factory, when any person has to work at a height from where he is likely to fall, provision shall be made, so far as is reasonably practicable, by fencing or otherwise, to ensure the safety of the person so working.
OSHA 29 CFR 1926.501(b)(2) Workers must be protected by guardrail systems, safety net systems, or personal fall arrest systems, even if they are not engaged in leading edge work, if they are on a walking or working surface that is 6 feet or more above a level where leading edges are under construction.
Our Learning Outcomes of Working at Height & Rescue at height training
By the end of work at height theory module participants would be familiar with:
- The roles and responsibilities of employers, constructors (if applicable), suppliers, supervisors, and workers in ensuring safe practices when working at height.
- Hazards of working at heights;
- Hierarchy of controls (such as elimination, isolation, engineering, substitution, administrative & PPE), related to working at heights;
- Types of warning methods (signs and bump lines) and physical barriers (fencing, guard rails, protective coverings) and their appropriate use;
- Use of Ladders and other Elevated Work Platforms;
- Use of PPE and Lifeline, fall protection and fall prevention systems.
By the end of work at height practical module participants would be familiar with:
- Situations in which bump lines, barriers, guardrails and safety nets would be appropriate;
- Discuss the limitations and the appropriate application of travel restraint, fall restraint and fall arrest systems;
- What an anchor point is; discuss the appropriate location and use of anchor points and examples of appropriate and inappropriate anchor points;
- Using the hierarchy of controls, identify the different types of equipment that may be available to safely perform a variety of tasks at heights;
- Understand the purpose of a fall rescue plan to ensure timely and effective responses during working at heights emergencies.
By the end of work at height rescue course, participants would be familiar with:
- Apply the hierarchy of controls in compliance with work at height legislation.
- Gain an understanding of emergency preparedness and rescue methods.
- Recognize the effects of suspension trauma and the critical need for timely rescue.
- Use of self-relief technique during harness suspension trauma situations.
- Harness inspection and fitness.
- Demonstrate effective casualty management and the use of temporary aids.
- Using of Rescue Kit.
- Simulated rescue of suspended casualty using a rescue kit.
Who can take the Work at Height & Rescue training?
- Personnel required to work at height.
- Workers designated as member of the ERT.
- This course is ideal for construction workers, scaffolders and facilities maintenance engineers.
- Managers, supervisors, individuals responsible for teams or groups of employees who require understanding of working at height.
Benefits of Work at Height & Rescue Training at NIST Global
- Renowned for delivering high-quality HSE training and consultancy services with expert faculty, innovative learning methods, and tailored industry solutions.
- Specializes in NEBOSH, IOSH, and ISO Consulting; pioneers in Training Process Outsourcing (TPO); has trained over 120,000 professionals.
- 15+ years HSE Training expertise; specialized in HSE domain.
Our Accreditations:
- NEBOSH Gold Learning Partner (first in India).
- ISO 9001:2015 certified quality management.
- Affiliated with global HSE professional organizations (IOSH, IEMA, AHA, NFPA, BSI, STI, NSC, CPD and IPAF).
Protect Your Workforce Today
Working at height involves significant risks, but with proper training and rescue plans, you can create a safer work environment. NIST Global comprehensive solutions ensure your team is equipped to prevent accidents, respond effectively to emergencies, and comply with all legal requirements.
Schedule your Working at Height & Rescue at height Training today and safeguard your team, assets, and reputation.
FAQS:
- Is this training available for individuals or only for corporate groups?
We offer training sessions for both individuals and corporate teams, with customized modules based on workplace needs. - Can the training be conducted at our worksite?
Yes, we provide on-site training for companies to ensure practical learning in real-world conditions. - How long does the Work at Height & Rescue Training take?
The duration varies depending on the course level, typically ranging from one or two days. - Does this training include hands-on rescue simulations?
Yes, the training involves practical rescue drills, use of rescue kits, and real-life emergency scenario exercises. - Can the training be customized based on our specific safety challenges?
Yes, we offer tailored training programs to address specific risks and safety requirements of your organization.